The irradiance map colors each roof face by how much sunlight it receives over a year, so you can see where panels will get the most sun. This article shows how to run the map in Design Mode, read its values, and know when to run it again.
In this article:
Before you begin
- A roof model in Design Mode — the map covers the roof faces you've drawn.
- Trees and obstructions drawn, or LIDAR shading turned on — the map only reflects shade from what's in your site model. For help choosing, see Choosing a tree shading method: LIDAR shading, LIDAR cutout, AI Tree Detection, and manual trees.
- Panels are optional — you can run the map before or after you place them.
Running the irradiance map
These steps turn on the irradiance map for the design you have open.
- In Design Mode, click Irradiance in the toolbar, or press I.
- Wait for Aurora to color the roof. The Irradiance button turns orange while the map is on, and the Annual irradiance panel opens at the top right of the canvas.
- Hover the roof or a panel to see the values at that point.
- To turn the map off, click the button again. Its tooltip reads Turn off irradiance while the map is on.
Reading the results
Lighter colors mean more irradiance, and darker colors mean less. Aurora scales the colors to each site's maximum possible annual irradiance, so colors aren't comparable between sites. Design Mode doesn't show a color legend, so hover the roof to check the actual values.
Annual irradiance panel
The panel lists Irradiance, Solar Access, TOF, and TSRF. For definitions, see Shading metrics: irradiance, solar access, TOF, and TSRF. The line under the panel's title tells you which values you're seeing:
- (Panels) average — the average across the design's panels, shown when panels are placed and you aren't hovering
- (Roof) point — the values at the spot you're hovering on the roof
- (Panels) point — the values at the spot you're hovering on a panel
When LIDAR shading is on, the panel shows LIDAR shading is enabled.
Monthly values
To see month-by-month values, click the arrow at the top right of the panel. Its tooltip reads Toggle expanded viewing mode. A bar chart opens with two tabs, Solar Access and Irradiance, covering January through December. Click the arrow again to close the chart.
Roof face averages
To compare roof faces, select a roof face and open Roof face information. Under Annual average across roof face, you'll see Irradiance, Solar access, TOF, and TSRF for the whole face. These averages appear with or without panels, so you can use them to choose roof faces before you design.
When to re-run
Results don't always update on their own after you change a design:
- After you add a tree — Aurora turns off the irradiance map and shows Reload irradiance simulation with the message Irradiance has changed and needs recalculation. Click Irradiance to run the map again. Production clears too, so click Simulate system.
- After you turn LIDAR or horizon shading on or off — changing Use LIDAR shading or Use horizon shading on the design's Simulation tab resets production. Click Simulate system to update it.
- After you delete panels — Production keeps showing its last simulated value. After any change to a design, click Simulate system before you rely on Production.
FAQ
Why does my irradiance map look darker than I expected?
Aurora scales the colors to each site's maximum possible irradiance, so the colors show how each spot compares with the best the site can get. Hover the roof to check the actual values.
Why is my production still showing after I deleted all the panels?
Production keeps its last simulated value after you delete panels. Click Simulate system to update it.
Is there a color legend for the irradiance map?
Not in Design Mode. The shade report's Annual irradiance map includes a legend in kWh/m²/year. For details, see Shade report: sections and values