The shade report shows each array's shading results, with maps and 3D views of the site. This article explains each section and how to read it. To create a report, see Generating a shade report.
In this article:
What it is
A shade report is a downloadable summary of a design's shading results. Use it to show customers, financiers, and incentive programs how much sun each array gets. For definitions of these metrics, see Shading metrics: irradiance, solar access, TOF, and TSRF.
In the shade report, an array is all the panels on one roof face, whatever their orientation. Separate groups of panels on the same roof face count as one array.
How it works in Aurora
Every page of the report starts with the same header, followed by the sections below in this order. Each map and 3D view has a pencil icon you can click to adjust the view.
Report header
The header shows Shade Report - followed by the project address, then Customer, Designer, Organization, Address, Coordinates, and Date. Date is the day you generated the report.
Annual irradiance
This map shows annual irradiance across the roof, with each array numbered to match its Array ID in the tables. The legend is in kWh/m²/year, and lighter colors mean more irradiance.
Summary
The Summary table has one row per array, with these columns:
- Array ID — the array's number on the map
- Panel count — the number of panels in the array
- Azimuth and Pitch — the array's orientation and tilt, in degrees
- Annual TOF, Annual solar access, and Annual TSRF — the array's yearly shading metrics
Below the arrays, Weighted average by panel count gives one annual solar access and one annual TSRF for the whole system, with arrays that have more panels counting more. Click Copy data to copy the table.
Monthly solar access % across arrays
This table shows each array's solar access for every month, January through December. It doesn't show monthly TOF or TSRF.
Site views
The next pages show the site from several angles:
- Zoomed out satellite view — the property and its surroundings from above
- 3D model — the site model with the design's panels
- 3D model with LIDAR overlay — the 3D model with LIDAR data shown over the site
- Street view with corresponding 3D model — a street-level view of the site, with the 3D model below it
Certification statement
The report ends with a statement in which the person shown under Designer certifies that they generated the report to the best of their abilities and believe its contents are accurate.
Key considerations
- The report reflects the design when you generate it. Aurora doesn't save it, so generate a new one after you change the design.
- The LIDAR overlay doesn't show the shading method. 3D model with LIDAR overlay appears whether Use LIDAR shading is on or off. To confirm which method the values used, check that setting in the design. For details, see LIDAR shading.
- Colors aren't comparable between reports. Aurora scales the Annual irradiance legend to each site's maximum possible annual irradiance, so the same color can mean different values on two reports.
FAQ
Why does the shade report show fewer arrays than I have panel groups?
The report counts one array per roof face. Separate groups of panels on the same roof face appear as one array, even if some panels are portrait and others are landscape.
Why doesn't the tilt in the shade report match my design?
The report rounds Pitch and Azimuth to whole degrees. For example, a pitch of 14.50° appears as 15°, and an azimuth of 101.42° appears as 101°.
Why don't the shade report values match Roof face information?
Roof face information in Design Mode averages the whole roof face, including areas without panels. The report shows values for each array, so the two can differ.