A weather dataset supplies the hourly sunlight, temperature, and other weather data that a performance simulation uses to represent a typical year at the project's location. Each design has two dataset settings — one for the Aurora engine and one for PVWatts — and the dataset you choose can change your production estimate.
In this article:
- Aurora engine datasets
- PVWatts datasets
- Weather stations
- Setting the default dataset
- Changing the dataset for a design
- Key considerations
- FAQ
- Related articles
Aurora engine datasets
These datasets are available for the Aurora engine:
| Dataset | What it is |
|---|---|
| NREL-PSM | Gridded data from the National Solar Radiation Database's Physical Solar Model, covering North America |
| TMY3 | Typical Meteorological Year 3 data from weather stations in the United States |
| Solcast | Satellite-based gridded data from Solcast. It isn't available on every account, and it can't be set as the account default. |
| IWEC2 | ASHRAE's International Weather for Energy Calculations 2.0, covering locations worldwide |
| CWEC | Canadian Weather for Energy Calculations data for locations in Canada |
| RMY | Reference Meteorological Year data for Australia |
| PVGIS | Data from the European Commission's Photovoltaic Geographical Information System for locations in Europe |
| PVGIS-ERA5 | PVGIS data based on ERA5, a global weather reanalysis from the European Centre for Medium-Range Weather Forecasts |
PVWatts datasets
PVWatts has its own Weather dataset setting, with these options: Default, NSRDB - PSM3, TMY3, TMY2, and International. With Default, PVWatts uses a dataset that depends on the project's location — for example, NSRDB data for US projects and International data for projects in Germany.
Weather stations
For the Aurora engine, the Weather station dropdown lists stations from the selected dataset, and Aurora selects the one closest to the project. For NREL-PSM, which uses gridded data, each option is a pair of coordinates (latitude, longitude) rather than a station name. TMY3 and IWEC2 list named stations.
Setting the default dataset
Your account's default datasets apply only to designs created after you change them. If you don't see Performance simulations in Settings, ask your account admin.
- Click Settings in the left navigation.
- Click Performance simulations under Projects and designs.
- Click Edit.
- Select a Weather dataset under Aurora: Best available, NREL-PSM, TMY3, CWEC, RMY, IWEC2, PVGIS-ERA5, or PVGIS.
- Select a Weather dataset under PVWatts.
- Click Save.
New designs now use these datasets. With Best available, Aurora uses the dataset with weather data nearest to each project. For the other settings on this page, see Performance simulation settings – Account configuration.
Changing the dataset for a design
Change a design's dataset when a project needs different weather data — for example, to meet a financier's requirements. These steps start from the design in Design Mode.
- Click Settings (the gear icon) in the toolbar, then click the Simulation tab.
- Select a Weather dataset under Aurora, then check the Weather station.
- Select a Weather dataset under PVWatts if the design uses PVWatts.
- Click Simulate system.
The production estimate updates with the new weather data. If the settings appear as read-only values, a financier sets them. See Running a performance simulation.
Key considerations
- Design lists can differ. The datasets you can pick on a design can differ from the list in account settings.
- Estimates are for a typical year. Weather datasets represent typical conditions, so actual production in a given year can be higher or lower. See P50 and P90 production estimates.
- NREL's new name. The US Department of Energy renamed NREL the National Laboratory of the Rockies (NLR) in December 2025. Aurora's dataset names still use NREL.
FAQ
Why did my production change after I switched weather datasets?
Each dataset uses different measurements and years, so the same design can produce different results. Use the dataset your company or financier requires, and compare designs that use the same one.
Can I make every design use the dataset my financier requires?
Set it as your account default, so new designs use it. If a design uses an integrated TPO financing option, the financier sets its dataset automatically.